Technical Papers

Application Engineering Notes

General

 US Conec Recommended MTP® Brand Multifiber Connector Production Equipment (AEN-1801 Rev 3.2)

 US Conec Recommended PRIZM® LightTurn® Brand Multifiber Connector Production Equipment (AEN-1818 Rev 1.2)

 Generic US Conec Baseline MT Ferrule Polishing Process Charts (AEN-1509)

 US Conec Recommended Cleaning Procedure for Multifiber and Single Fiber Connectors and Mating Adapters (AEN-1902)

 

MTP® Installation

 MTP® Connector Installation Onto Bare Non-Cabled Multimode and Single-mode Multifiber Optical Ribbon (AEN-1403 Rev 2.1)

 MTP® Brand Connector Installation Onto 2.0 mm Jacketed Round Cable with Loose Fibers and Aramid Yarn (AEN-1420)

 MTP® Brand Connector Installation Onto 3.0 mm Jacketed Round Cable With Loose Fibers (AEN-1407 Rev 2.1)

 MTP® Brand Connector Installation Onto 3.0 - 3.6 mm Jacketed Round Cable With 12 Loose Fibers Using US Conec Cable Holder P/N 13668
     (AEN-1418)

 24 Fiber MTP® Connector Installation Onto 2x12 Fiber 3.0 mm Jacketed Round Cable With Loose Fibers (AEN-1409 Rev 1.1)

 24 Fiber MTP® Connector Installation Onto 3.6 mm Jacketed Round Cable With Bundle Loose Fibers (AEN-1410)

 48 Fiber MTP® Connector Installation Onto 4.5 - 5.5 mm Round Jacketed Cable With Stranded or Unitized Loose Fiber Bundles (AEN-1415)

 MTP® Connector Installation Onto Standard Oval Cabled Multimode and Single-mode Multifiber Optical Ribbon (AEN-1401 Rev 2.1)

 Operating Instructions for the US Conec Loose Fiber Ribbonizing Tool (AEN-1408 Rev 1.0)

 Operating Instructions for the US Conec Disposable Loose Fiber Ribbonizing Die (AEN-1414)

 Operating Instructions for US Conec Fiber and Ribbon Holders (AEN-1422)

 US Conec Recommended Epoxy Bead Size and Polishing Preparation (AEN-1516)

 

Test and Measurement

 MTP® Insertion Loss and Back Reflection Testing (AEN-1911)

 US Conec Recommended MT Ferrule Endface Geometries (AEN-1915 Rev 1)

 

Miscellaneous

 Instructions for MTP® Brand Connector Housing Removal and Pin Clamp Change (AEN-1405 Rev 1.5)

 Instructions for Mating MT Ferrules When Using a Spring Clamp Device (AEN-1910)


1138 25th Street Southeast
Hickory, North Carolina 28602

Tel: (828)323-8883Toll Free: (800)769-0944

Copyright © 2015 US Conec Ltd., Powered By: Easyfish Marketing